Search Results for "stylus"

There were 9 articles found for your query:

“Software requires use of interactive stylus” error message
If you get the error message - “Software requires use of interactive stylus” when touching your stylus to the whiteboard please do the following: Try another stylus that you are sure is w...
Stylus Latency
When using your stylus with eBeam Projection reaction to input is slow. Replace the stylus battery - unscrew the back and insert new AA battery Try another stylus if available Be sure your computer i...
How to Properly Exit Software
... Right-click in the center of the eBeam wheel and select 'Exit' or Right-click on the stylus icon in the taskbar or menubar by the clock and select 'Exit'
eBeam Hardware Firmware update
...m at bottom of whiteboard and room has bright lights on ceiling eBeam does not consistently pick up stylus taps on board Calibration gets thrown off for no reasonIf any of these apply here is how to u...
Stylus Not Working
The eBeam stylus uses a combination of infarad and ultrasonic technology to communicate with the eBeam pod. If your stylus is not working here are a few things to try: Depress the tip - does it buzz?...
Calibration is Off Point
... common is the projector or eBeam is shifted. When an eBeam's calibration is off when you touch the stylus to the whiteboard the mouse pointer will not appear at that point - instead it may be off a f...
Unable to Calibrate eBeam with Stylus
Try the following to determine what is causing the calibration issue: Check the stylus battery Position the eBeam unit at one of the top corners of the interactive area at a right angle Be sure the e...
Setup Wacom Graphire 6x8
... with 'no passkey' When the pairing process completes successfully test the connection by using the stylus on the tablet > If the blue light does not stop flashing: remove and re-pair the Wacom tab...
Calibration is Not Retained
Calibration should be retained between uses. Be sure the unit is stationary and the software is closed correctly after use. If you use more than one computer with the eBeam you will have to recalibrat...